HAAKE™ Viscotester™ iQ Rheometer - Air/ Ball-bearing
เครื่องวัดความหนืดและพฤติกรรมการไหล
Measure and analyze the rheological properties of a wide range of liquid, paste and semi-solid samples with the Thermo Scientific™ HAAKE™ Viscotester™ iQ and Viscotester iQ Air rheometers. The Viscotester iQ rheometer is an intuitive solution designed to meet the daily rheological requirements of QC labs.
The Viscotester iQ Air rheometer is the smallest commercially available oscillation air bearing rheometer in the world. Both set new standards in modularity, ease of use, increased efficiency, and intelligent user guidance, from simple viscosity determinations to complex rheological investigations.
Applications
Ideal for Industrial Quality Control in Paints & Coatings, Foods, Cosmetics & Pharmaceuticals, Battery & Clean Energy, Polymers & Chemicals, Cement & Building Materials, Petrochemicals
- Flow and viscosity curves of liquid and semi solid food formulations
- including low viscous fluids with Viscotester iQ Air
- Thixotropy tests and yield stress measurements of structured foods
Specification
| Torque Range | 0.01 mNm – 100 mNm Torque resolution: 0.001 mNm |
| Angular Resolution | 1.25 µrad Angular velocity range: 0.001 rad/s – 157 rad/s 0.01 rpm – 1500 rpm |
| Frequency Range | 0.1 Hz – 50 Hz Minimum deflection angle: 10 µrad |
| Operating Temperature Range | Universal Peltier controlled Module (TM-PE-C) Coaxial cylinders: -5°C up to 160°C Plates and cones: 0°C up to 140°C Depending on ambient temperature Universal Liquid controlled Module (TM-LI-C32 / – C48) Coaxial cylinders: -20°C up to 180°C Plates and cones: -10°C up to 160°C Depending on the circulator model and the bath liquid Peltier controlled Plate (TM-PE-P) 0°C up to 160°C Liquid controlled Plate (TM-LI-P) -20°C up to 180°C Depending on the circulator model and the bath liquid Electrically controlled Cylinder (TM-EL-C) up to 300°C Available for pressure cell configuration |
| Measuring Method | In rotation: Controlled Rate (CR), Controlled Stress (CS) In oscillation: Controlled Deformation (CD), Controlled Stress (CS) |
| Shear Rate | Shear rate range: 0.004 s -1 – 11415 s -1 (Depending on the measuring geometry used. Calculated theoretical values.) Shear stress range: 0.04 Pa – 63660 Pa (Depending on the measuring geometry used. Calculated theoretical values.) |
| Viscosity Range | In rotation: 0.001 Pa s – 600000 Pa s (Depending on the measuring geometry used. Calculated theoretical values.) In oscillation: 0.03 Pa s and higher |
| Measuring Geometries Interface | Coaxial cylinders, double-gap cylinders, parallel plates, cones, vane rotors TCP/IP for communication with PC USB: 1 port for USB flash drive for HAAKE ViscotesteriQRheoApp, 1 port for keyboard or barcode reader |
| Power Supply | Autoswitch: 100-240 VAC, 50/60 Hz |
